Cisterna semirremolque nuevo para transporte de gas DOĞAN YILDIZ 5 m3 to 250 m3 LPG STORAGE TANK

115 m3 LPG ABOVE GROUND STORAGE TANK FEATURES

BRAND DOĞAN YILDIZ

TANK TYPE Horizontal Cylindrical

PROJECT CODE AD-MERKBLATTER

DESIGN TEMPERATURE Min -20˚C / max +50˚C

DESIGN PRESURE 17,5 bar

TEST PRESURE 26,5 bar

MATERIAL P355 GH

HEAD TYPE Elliptical

EXTERNAL TANK DIAMETER 3.200 mm

BODY TANK THICKNESS 14 mm

HEAD TANK THICKNESS 16 mm

TOTAL LENGTH OF TANK 15.500 mm

COROSION 1 mm

TANK VOLUME 115 m3

EQUIPMENT TANKS OVER 2” Block Flangeà 2 units àREGO

3” Block Flangeà 3 units àREGO

4" Safety relief Valve 3 units à REGO (MULTIPORT)

Magnetic Level Gauge  1 unit Rochester

1 “ NPT Rotagauge (Rotary Level Indicator) à 1 unit à REGO

Glycerine pressure gauge (0-25 bar), Ø 100 à 1 unit

Thermometer (-30 / 60 ˚ C) Ø100 à 1 unit

Fixed Level Vent Valve (10%-50%-80%) 1 unit à REGO

2” Drain Flange à 1 unit

Manhole 16 “

Blasting and Painting Before painting, the Tank will be sand blasted with SA 2.5 quality undercoat & polyurethane based white topcoat applied providing a total thickness of min. 150 microns.

Control (Inspection and Tests) All tests & inspections mentioned below wiil be carried out under the control of third party & certified by the same authority.

• Checking & approval of design & calculations,

• Material inspection & stamp transferring seperately,

• Visual & dimensional inspection plate orientation,

• Head control,

• Radiographic control,

• Penetrate dye test,

• Hydrostatic test

The reports of the A/M tests & inspections will be presented to the customer together with the inspection certificate of teh tank whicih will be given by the third party after the completion of the tank & the inspections. CONTROL UNION

CERTIFICATION ISO 9001-2008 VE EN 3834-2

WELDING PROCESS All welders are certified according to EN 287-1:2004 standard. Full penetration will be provided in weld seams. Welding will be carried out as submerged arc welding by welders.The Grooves will comply with EN ISO 9692-2. & The Filling Material with EN ISO 14171 & The Flux with EN 760.

HEAT TREATMENT Caps will be treated by heat to relieve the stress.